Lexmark Z12 Color Jetprinter User Manual page 37

User's guide for windows 2000 (2.3 mb)
Hide thumbs Also See for Z12 Color Jetprinter:
Table of Contents

Advertisement

Steps to basic printing
Maintaining your printer
Troubleshooting
Appendix
Index
• Your printer software is set to an LPTn port if you are using a
parallel cable or to a USB port if you are using a USB cable.
To check your port settings in Windows 2000:
Click Start.
1
Select Settings.
2
Click Printers.
3
Right-click the Lexmark Z12 Series ColorFine
4
Click Properties.
5
Click the Ports tab.
6
Select USB or LPTn to change your port.
7
Click OK.
8
If you have a switch box or other device (such as a scanner or fax)
connected to the computer's parallel port, make sure it supports
bidirectional communication. You may need to disconnect your
printer from the switch box or other device and connect it directly to
your computer.
If you are using a USB hub with your printer, remove the hub and
connect the USB cable directly to the computer.
37
Troubleshooting
icon.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z12 Color Jetprinter and is the answer not in the manual?

Table of Contents