HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 24

Hp storageworks fabric os 6.1.2b release notes (5697-0125, august 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

Closed defect summary
Panic occurs with switch in Access Gateway mode when N_Port to
F_Port trunking is enabled.
Unexpected return code from FastWrite and Tape Pipelining causes
GE_Port traffic interrupt.
When first upgrading a newly installed Fabric OS 6.0.x director to
Fabric OS 6.1.x, there is a very small window during which 8-Gb
blades may fault.
Fabric OS 6.1.1d fixes
Table 12
lists defects closed in the Fabric OS 6.1.1d firmware release.
Table 12 Fabric OS 6.1.1d closed defects
Closed defect summary
After multiple controller reboots, PLOGI Accept is dropped due to
missing CAM entry.
VI to PT routes are deleted following portdisable/portenable
on HP StorageWorks SAN Director 48 Port FC blade.
Switch may experience timeouts and traffic interruption during HCL
operation of neighboring switch with Fabric OS 6.2.0.
Observed kernel panic on HP StorageWorks DC SAN Director, in RTE
module.
During HA recovery, Fabric Watch failed to initialize on fully populated
Brocade DCX. Reports switch health status as Marginal/Down. Traffic
is not impacted, but DCFM call home will not be initiated.
License database can be corrupted after configdownload and
cannot be added back. 4G platform can disable QoS but cannot en-
able QoS without a license.
Customer may experience high CPU load and unexpected blade errors
due to problem responding to ASIC-generated interrupts.
Some OS/HBA combinations take down FC link when N_Port-gener-
ated RSCNs are delivered by the switch with 0x08 (Fabric OS 6.1.1b
and 6.1.0g) or 0x20 (6.1.0x) as the event qualifier. The fix reverts to
the Fabric OS 6.0 value of 0x00.
WebTools GUI freezes for a few seconds about every 15 seconds.
WebTools light stops blinking, and cannot scroll any windows.
24
Solution
Fixed in Fabric OS 6.1.1c
Fixed in Fabric OS 6.1.1c
Fixed in Fabric OS 6.1.1c
Solution
Fixed in Fabric OS 6.1.1d
Workaround: Before upgrading to
6.1.1d, perform portdisable /
portenable on the device port to
regain the host/device connection.
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d
Fixed in Fabric OS 6.1.1d

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12

Table of Contents