HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 20

Function
Fabric summary
FCIP tunnel configuration
GigE ports interface
GigE ports route
Non-local switch ports
display in zoning tree
Remove Offline or inac-
cessible Devices
Zone database summary
ping
Zoning
Fabric OS 6.1.1 fixes
Table 8 lists defects closed in the Fabric OS 6.1.1 firmware release.
Table 8 Fabric OS 6.1.1 closed defects
Closed defect summary
During storage failover/failback test, traffic stops and fails to recover
in single and dual backbone configurations.
A failure was detected in the MP Router blade (FR4-18i) due to a dead
heartbeat.
Link drops when FLOGI is received before the port comes online on
an FL_Port.
20
WebTools 6.1.0
Reports > Fabric summary
Port Admin Module >
GigE tab
Port Admin Module >
GigE tab
Port Admin Module >
GigE tab
Zone Admin
Admin Domain
Switch Admin > DCC
policies
Performance Monitoring
Zone Admin
Zone Admin
DCFM
Monitor > Reports > Fabric
Summary report
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > Zoning
Configure > Zoning
Replace/Replace All zone
members by selecting the offline
devices from the zone tree.
Offline devices have an unknown
overlay badge with good
visibility.
Configure > Zoning
Zoning report for both online and
offline database
Solution
Fixed in Fabric OS 6.1.1
Fixed in Fabric OS 6.1.1
Fixed in Fabric OS 6.1.1
Comments
Viewing FCIP tun-
nels is still suppor-
ted in WebTools
6.1.1, but New,
Edit Config, and
Delete are avail-
able only in
DCFM.
In WebTools,
non-local switch
port id/WWN
can be added us-
ing text box.