4
Creating a zoning configuration
To enable a zoning configuration
1. Connect and log in to the switch as admin.
2. Enter the cfgEnable command.
3. Enter the cfgSave command to save the change to the defined configuration.
44
switch:admin> cfgenable iscsi_cfg001
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'iscsi_cfg001' configuration
zone config "iscsi_cfg001" is in effect
Updating flash ...
switch:admin>
(yes, y, no, n): [no] y
iSCSI Gateway Service Administrator's Guide
53-1000603-01