Identifying Iscsi Components - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual
Brocade iscsi gateway service administrator's guide (53-1000603-01, october 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
iS C S I virtual target 1
iS C S I virtual target 2
iS C S I virtual target 3
FIGURE 5
Identifying iSCSI components
See
supports IQN only to identify the iSCSI components, such as the iSCSI initiator and iSCSI VT. Every
iSCSI initiator and iSCSI VT on the same network and SAN must have a unique IQN.
The format of an IQN is as follows:
type.date.naming authority:<
A Brocade-created IQN includes "2002-12.com.brocade" and the device WWN as shown in the
following example:
A Microsoft-created IQN includes "microsoft" and the system name:
iqn.2003-11.com.microsoft:win2k-sn-192168101
The following figure shows an iSCSI gateway that has three iSCSI VTs and two iSCSI initiators.
iSCSI Gateway Service Administrator's Guide
53-1000603-01
LUN
0
1
2
LUN
0
LUN
0
iSCSI VT advanced LUN mapping
Figure 2
for a basic implementation with an IP network. The Brocade iSCSI gateway service
Type
Date
Auth
+--++-------+ +------+ +---- -----------------+
iqn.2002-12.com.brocade:10:00:00:05:1e:aa:bb:cc
Overview of iSCSI gateway service
F C target 1
LUN
0
1
2
3
4
5
F C target 2
LUN
20
21
22
23
24
25
user_defined
>
User defined
1
5
Advertisement
Table of Contents
