Replicating A Switch Fabric Watch Configuration - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

11
Replicating configurations
To replicate a switch's SNMP configuration
1. Select the switch and select Tasks > Switch Configuration Management > Replicate
2. Choose to SNMP Configuration to launch the Replicate SNMP Configuration wizard, as shown
3. Choose the source that you want to replicate. You can use a file, another switch, or the Fabric
4. Depending on the source type you chose, enter (or select) the information and click Next.
5. Select the destination switch. This is the switch you want to replicate to. Click Next.
6. Click Replicate to begin the process.

REPLICATING A SWITCH FABRIC WATCH CONFIGURATION

1. Select the switch and select Tasks > Switch Configuration Management > Replicate
2. Choose Fabric Watch Configuration to launch the Fabric Watch Configuration wizard, as shown
174
Configuration.
in Figure 111. Click Next to continue.
FIGURE 111
Replicating the SNMP configuration
Manager Repository. Click Next to continue.
Configuration.
in Figure 112. Click Next to continue.
Fabric Manager Administrator's Guide
53-1000610-01