Monitoring Fabric Events; Viewing Fabric Events - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual
Brocade fabric manager administrator's guide v6.0.0 (53-1000610-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
7
Monitoring fabric events
3. Select which type of alert is to be displayed in bold text in the table.
4. Click OK.
FIGURE 68
Monitoring fabric events
Fabric events are events generated by the Fabric OS. Fabric Manager displays these events in the
Information panel. These events are stored in the Fabric Manager database.
VIEWING FABRIC EVENTS
You can monitor fabric and switch events from the Events tab in the Information panel. The Events
tab allows you to filter events to include only the information you want, and export, copy, and print
the table. The events table displays a maximum of 1000 events. If there are more events and you
choose to view them all, click All Events, described in
You should view fabric events on a periodic basis to see if any action is required. How often you
should check depends on your company's requirements.
Events have the following severities:
•
•
•
•
•
•
104
Alert display options
Panic
Critical
Error
Warning
Information
Debug
"Viewing all events"
on page 106.
Fabric Manager Administrator's Guide
53-1000610-01
Advertisement
Table of Contents
Troubleshooting
