Event Message Severity Level; Trace Route - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

27

Event message severity level

Event message severity level
Fabric Manager writes event messages to a log file, which can then be used to capture diagnostic
information. You can set the log parameters to capture diagnostic information only at the severity
level you want. Configuring the severity level determines which messages you want Fabric Manager
to save to the log file. Any changes you make to the log level are immediate (they do not require an
application restart).
To configure the severity level of event messages that are logged
1. Click Edit > Preferences.
2. Expand User Specific and click Log Parameters.
3. Select one of the following severity levels from the Log Level drop-down list.
4. Click OK.

Trace route

The trace route feature of Fabric Manager combines the functionality of the pathinfo and fcping
commands.
352
The Preferences window displays.
The Log Parameters dialog displays (see
FIGURE 230
Setting the log parameters
The hierarchy, from most severe to least is: Fatal, Error, Warning, Info, and Debug. Fabric
Manager logs all events of the selected severity level and lower. Selecting Off disables the
logger.
Figure 230).
Fabric Manager Administrator's Guide
53-1000610-01