Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 249

To create a reboot group
1. Select Tasks > Reboot > Create Reboot Sequence.
2. Select a fabric from the Select Fabric drop-down list.
3. Click Create.
4. Type a name for the reboot group In the Name of the Reboot Group field.
5. Specify the amount of time allowed for the fabric to stabilize before a timeout occurs in the
6. Optional: In the "What to do if timeout occurs?" field, click one of the following buttons:
Fabric Manager Administrator's Guide
53-1000610-01
The Create or Change Reboot Groups and Sequence window displays (see
FIGURE 143
Create or change reboot groups and sequence
The Create Reboot Group dialog opens, as shown in
FIGURE 144
Create reboot group
Fabric Stabilization Timeout field.
-
Prompt: Provides a prompt whenever a timeout occurs that asks if you want to continue.
-
Continue: Continues the reboot sequence when a timeout occurs.
Rebooting switches
Figure
Figure 144.
15
143).
223