Indicator Light Warnings - Pentax 203125 - PocketJet II B/W Direct Thermal Printer User Manual

Indicator Light Warnings

Chapter 5, "Reference," contains a table listing all combinations of
indicator lights.
The POWER indicator light does not light
The printer is receiving no power. If you are using the AC adapter,
make sure it is connected properly. See page 2, "Connecting to an AC
Outlet." Make sure the AC power outlet is "live." If you are using a
DC adapter, make sure power is connected.
The POWER and BATTERY indicator lights are
blinking
A battery error has occurred. Make sure the battery has been installed
and connected properly. See page 23, "Installing the Battery."
If the battery is connected properly, you may have attempted to charge
the battery and it has become overheated during a discharge or charge
cycle. Allow the battery to cool before continuing to discharge or
charge it.
If the indicator lights still show that a battery error has occurred, the
battery may be defective or the printer may need service. Call Pentax
or your local Authorized Service Center and ask for technical support.
The POWER, DATA, and BATTERY indicator lights
are blinking
A system error has occurred. Turn the printer off and on again to clear
the system error. You may need to cancel the print job and repeat
turning the printer off and on again. If you cannot clear the error in this
manner, call technical support.
Page 42