Connecting to Your Computer
Via Cable to a PDA (such as a Pocket PC, Win CE,
Palm, or RIM OS device)
1. Make sure your printer is off before installing the interface cable.
2. Take the printer end of the cable and hold it so the notched metal
surface is facing up. All cables will have this connector as shown in
the serial cable example below.
3. Insert the printer end of the cable into the interface connector on the
side of the printer. See example, Figure 7. This is the proper
connection regardless if this is a serial, parallel, Infrared, or USB
cable.
FIGURE 7. Connecting the PocketJet to your computer
CAUTION: Always insert and remove the interface connector
gently. Press the latching devices on each side of the
interface connector when removing the cable.
4. Connect the other end of the cable to the serial synchronization cable
provided with your PDA.
Via PC or Laptop Computer
If you want to connect your PocketJet to a PC or laptop computer, use
the Infrared Adapter or one of the other optional interface cables (PC
Serial, Parallel, USB, etc. but not the 6" serial cable)
Via Infrared Adapter
See the instructions that come with the Pentax Infrared Adapter for
connection instructions.
Page 8