Table of Contents
Advertisement
• Manual Install
1.
Insert the Driver Disk CD into the CD drive on your PC.
2.
From the "Start" menu, choose "Run."
3.
Choose "Browse" and find one of these three files:
<CD Drive>:\PJ200\PalmOS \InStepPrint\ and then select all
available DRC and PDB files.
<CD Drive>:\ PJ200\PalmOS \ISComplete BtPrint and then
select all available PRC and PDB files
<CDDrive>:\PJ200\PalmOS\StevensCreek
PalmPrint\Install.exe
4.
Choose "OK" and follow the on-screen instructions.
5.
HotSync with your Palm.
RIM Blackberry Systems
Check with
www.instepgroup.com
453-6144, ext. 1820) for the latest Blackberry software information.
Psion/Symbian (EPOC) Version 5 and Version 6
The ER 6.0 driver is available on the CD (V. 2.0 or higher) and the
Pentax Website as of this publication. Check the website or Technical
Support for ER6.1 and ER 7 availability. Note that Version 6.0 will
only work for Nokia 92xx Communicator devices.
• CD Install
1.
Establish a connection from your Psion/Symbian/EPOC device to
your PC. You must have installed the connection software that
came with our device to do this.
Enable "Remote Link." Select "System:File
Menu:Tools:Remote Link" and choose the desired interface
method, Infrared or Cable.
Make sure no other applications have control of the port.
Select "Mobile Devices:File:Communications:Auto Connect"
and choose "Only While Mobile Devices Window Is Open."
2.
Insert the Driver Disk CD into the CD drive on your PC.
3.
From the "Start" menu, choose "Run."
4.
Choose "Browse" and locate the most appropriate Pentax.sis file
on the CD:
<CD Drive>:\<PJ2 or PJ200>\EPOC-Symbian\<ER5 or
ER6>\Pentax.sis.
5.
Insert the Driver Disk CD in your CD drive.
Page 12
or Pentax Technical Support (1-800-
Hide quick links:
Advertisement
Table of Contents
