ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Figure 26-44
b. Under IP Interface Configuration, scroll down to interface 1/0/13 and select the checkbox for 1/0/
13. 1/0/13 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration.
•
In the IP address, enter 192.168.1.2.
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
5.
Enable rip on the interface 1/0/1.
a.
From the main menu, select Routing >RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 26-45
b. Select 1/0/1 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
26-35
v1.0, June 2010
PIM