ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Web Interface: Configuring SNTP
To use the Web interface to configure SNTP, proceed as follows:
1.
Configure SNTP server
a.
From the main menu, select System > Management>Time>SNTP Server Configuration. A screen
similar to the following displays.
Figure 14-1
b. Enter the following information in the SNTP Server Configuration.
•
Select IPV4 in the Server Type field.
•
In the Address field, enter 208.14.208.19
•
In the Port field, enter 123
•
In the Priority field, enter 1
•
In the Version field, enter 4
c.
Click Add.
2.
Configure SNTP global configuration
a.
From the main menu, select System > Management>Time>SNTP Global Configuration. A screen
similar to the following displays.
14-4
Simple Network Time Protocol (SNTP)
v1.0, June 2010