ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
a.
From the main menu, select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
Figure 13-38
b. For the DHCP Snooping Mode, select Enable.
c.
Click Apply. At the end of this configuration a screen similar
2.
Enable DHCP snooping in a VLAN.
a.
From the main menu, select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
Figure 13-39
b. In the VLAN Configuration table, set the VLAN ID as 1.
Security Management
v1.0, June 2010
toFigure 13-38
displays.
13-37