Ports - D-Link DWS-3160-24TC Hardware Installation Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
•
Management Information Base (MIBs) for MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like
MIB, 802.1p MIB, IF MIB, RADIUS Authentication Client MIB, RADIUS Accounting Client MIB, Ping and
Traceroute MIB, Private MIB, IPv6 MIB, IP MIB, TCP MIB, Zone Defense MIB, UDP, ICMP, ARP, Entity MIB, and
TCP/IP-based Internet.
Wireless Local Area Networking (WLAN) features that can be found on this Switch series are:
•
Switch and Access Point Discovery.
•
Intra-Switch Roaming
•
Layer 2 and Layer 3 Roaming.
•
MSS Reduction.
•
AP to AP Tunneling.
•
Multiple SSIDs per Switch.
•
Automatic AP transmit output power adjustment.
•
Load Balancing.
•
AP Auto-discovery.
•
AP, Client and Ad-hoc Client monitoring.
•
Centralized RF/Security policy management.
•
Unified AP Support (DWL-8600AP, DWL-3600AP
and DWL-6600AP).
•
SVP (Spectralink Voice Protocol).
•
Wireless Security Modes like WEP, WPA, and WPA2.
•
Wireless Intrusion Detection System (WIDS).
•
Rogue AP Mitigation.
•
Station Isolation.

Ports

In the DWS-3160 Series there are 2 Switches. They are:
The DWS-3160-24TC that includes 20 Copper ports (10/100/1000BASE-T) and 4 Combo Copper/SFP ports
•
(1000BASE-T/SFP), Layer 2+, Unified Switch.
• The DWS-3160-24PC that includes 20 Copper PoE ports (10/100/1000BASE-T) and 4 Combo Copper/SFP
PoE ports (1000BASE-T/SFP), Layer 2+, Unified Switch.
All the Switches, in the Series, are equipped with:
•
One RJ-45 Console port (used to connect to the Command Line Interface (CLI) of the Switch). This port uses a
special console cable (included with the packing) with a DB9 interface to connect the Switch to a PC.
•
One Redundant Power Supply (RPS) outlet for optional external RPS.
NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management soft-
ware, go to http://dview.dlink.com.tw/
•
Fast Roaming.
•
Inter-Switch Roaming
•
Tunnel Protocols like D-Link Wireless AP Protocol
(DWAPP) and CAPWAP-like protocol.
•
Tunnel (L3 Tunneling) and non-Tunnel (VLAN
Forwarding) modes.
•
Multiple ESSIDs per Access Point.
•
Automatic AP RF channel adjustment.
•
RF Self-healing around Failed AP.
•
AP Software version Auto-detection and Central
Firmware dispatch.
•
Remote AP rebooting.
•
AP Authentication.
•
Visualized AP Management Tool.
•
Wireless Multimedia (WMM).
•
Wireless Standards like IEEE 802.11a, 802.11b,
802.11g, 802.11d, 802.11h, 802.11n.
•
IEEE 802.1X EAP types like EAP-MD5, EAP-TLS,
EAP-TTLS, EAP-FAST, EAP-SIM, PEAP-GTC,
PEAP-TLS, and PEAP-MS-CHAPv2.
•
Rogue AP Detection.
•
Captive Portal.
and download the software and manual.
3