Hardware Overview; Leds - D-Link DHP-540 User Manual

Section 1 - Product Overview
D-Link DHP-540 User Manual

Hardware Overview

• Solid - Indicates that the device is receiving electrical power.
• Blinking - Indicates that the device is setting itself up after reset or Simple Connect
1
Power LED
Button was pressed or power saving mode enabled.
• Off - The device is not receiving electrical power.
• Solid - The device is connected to a PowerLine network.
• Blinking - The device is transmitting data.
• Off - The device has not found any other compatible PowerLine devices using the
same encryption key.
2
PowerLine LED
The color indicates the PowerLine link rate:
• Green - The PowerLine link rate is faster than 80 Mbps.
• Amber - The PowerLine link rate is between 50 Mbps and 80 Mbps.
• Red - The PowerLine link rate is less than 50 Mbps.
• Solid - The Ethernet port is linked but there is no data traffic.
3
LAN LEDs (1-4) • Blinking - The device is transmitting data.
• Off - There is no Ethernet connection.

LEDs

2
1
3
5