Rear Panel - Samsung DVD-V9800M Instruction Manual

Rear Panel

1 AUDIO OUT
Connect to the Audio input jacks of your television.
2 COMPONENT VIDEO OUT
- Use these jacks if you have a
Component Video in jacks.
These jacks provide PR, PB and Y video.
3. HDMI OUT JACK
- Use an HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
- If an HDMI cable is connected to an HDMI-
compatible TV, HDMI will be output
automatically within 10 seconds.
- If you want to use
Output, unplug the
DVD/VCR Output Chart
Type of Connection
COMPONENT VIDEO OUT
AUDIO OUT (L,R)
DIGITAL AUDIO OUT (OPTICAL, COAXIAL)
LINE OUT (A/V)
HDMI OUT
Notes
■ Consult your
TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system.
S
E T U P
TV with
the Video or Component
HDMI cable.
DVD Output Jacks
O
O
O
O
O
ˆ ˆ
¨ ¨
4 DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
- Use either an optical or coaxial digital audio
cable to connect to a compatible Dolby Digital
receiver.
- Use either an optical or coaxial digital audio
cable to connect to an A/V Amplifier that
contains a Dolby Digital, MPEG2 or DTS
decoder.
5 LINE IN 1 (VIDEO/AUDIO)
Connect to the
external device.
6 LINE OUT (VIDEO/AUDIO)
Use a Video/Audio
Video/Audio input jacks on your television.
You must have these jacks connected to see
video playback from the VCR on your TV.
VCR Output Jacks
X
X
X
O
X
ENG-11
Œ Œ ´ ´
ˇ ˇ
Ø Ø ¨ ¨
Video/Audio output jack of your
cable to connect to the
O : Active.
X : Inactive.