Table of Contents
Advertisement
O
iiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii_!!_
iiiiiiiiiiiiiiiiiiiiii_iiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii_iii
!,iiiiiiiiiii!ili!i;i;i;i
O
O
O
Q
O
DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial
digital cable to connect to a compatible
Dolby Digital receiver.
Use to connect to an A/V
Amplifier
that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
• Connectto the Audio inputjacks of your television, audio/video receiver,or VCR.
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECT switch must be set to the 5251(4801) position.
S-VIDEO OUT JACK
• Use the S-Video cable to connect thisjack to the S-Video jack on your television for a higher quality picture.
• The VIDEO OUT SELECT switch must be set to the 5251(4801) position.
COMPONENT
VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. Thesejacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality.
• If 525P(480P) VIDEO is selected, pro g ressive scan mode will work.
• If 5251(4801) VIDEO is selected, interlaced scan mode will work.
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.
Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported,
follow the TV User's Manual's instructions regarding
Progressive
Scan settings in the TV's menu system.
Advertisement
Table of Contents
