Connecting To A Tv (Progressive) - Samsung DVD-V9800M Instruction Manual

Connecting to a TV (Progressive)

1
Using Component video cables (not included),
connect the COMPONENT VIDEO OUT jacks on
the rear of the DVD-VCR to the
jacks of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white)
on the rear of the DVD-VCR to the
and white) IN jacks of your
Turn on the DVD-VCR and TV.
3
With the unit in Stop mode, set the video output
to Progressive Out in the Setup Menu.
press ENTER and progressive will be output.
(See pages 55)
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan
settings in the TV's menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have
the Video/Line Out (yellow) jack
Only the 480p output resolution is possible with Component.
C
O N N E C T I O N S
COMPONENT IN
AUDIO (red
TV.
Then
connected.
jacks
White
Audio Cable
Red
ENG-16
Blue
Red Red
Green
Component Cable
(not included)
Red Blue Green
White