Connecting To A Tv (Interlace) - Samsung DVD-V9800M Instruction Manual

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(P
are delivered through the audio out or line out audio).
1
Using Component video cables (not included),
connect the COMPONENT VIDEO OUT jacks on
the rear of the DVD-VCR to the
jacks of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white)
on the rear of the DVD-VCR to the
and white) IN jacks of your
Turn on the DVD-VCR and TV.
3
With the unit in Stop mode, set the video output
to Progressive Out in the Setup Menu.
press ENTER and Component Interlace will be
output. (See pages 55)
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The component jack of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y"
depending on the manufacturer. The number and position of jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you
must have the Video Out (Yellow) jack connected.
- You can hear sound from the LINE OUT AUDIO or AUDIO OUT (red and white) jacks with a Component
connection. VCR audio only outputs through Line Out Audio jacks (Red,White).
C
O N N E C T I O N S
), red(P
B
COMPONENT IN
AUDIO (red
TV.
Then
) signals to present clear and clean images. (Audio signals
R
jacks
White
Audio Cable
Red
ENG-17
Blue
Red
Red
Green
Component Cable
(not included)
Green
Red Blue
White