Changing The Start-Up Screen - Pentax Optio H90 Orange Operating Manual

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
- The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
- One of the 3 pre-installed images
- One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ^ (Start-up
Screen).
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller (45)
7
to choose the image for the start-
up screen.
Only images suitable for the start-up screen
are displayed. You can also choose one of
the 3 pre-installed images or the Guide
Display Start-up screen already stored in
the camera.
5
Press the 4 button.
The start-up screen is set.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when the camera starts up in the
playback mode.
196
Start-up Screen Start-up Screen Start-up Screen
For setting a captured
image as the Start-up
Screen
Cancel Cancel Cancel
MENU
100 - 0017 100 - 0017
100
Cancel Cancel Cancel
MENU
2/2 2/2
OK OK OK OK
0017
OK OK OK
OK