Pentax Optio H90 Orange Operating Manual page 111

1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [White
Balance].
3
Press the four-way controller (5).
The [White Balance] screen appears.
4
Use the four-way controller (23)
to change the setting.
You can check the result of selected white
balance setting on the preview image each
time you press the four-way controller
(23).
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Refer to the section "To Set the White Balance Manually" for
instructions on adjusting the white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.119).
Saving the White Balance setting 1p.125
White Balance
Auto Auto Auto
Cancel Cancel Cancel
MENU
3
OK OK OK
OK
109