Setting Pixel Track Sr - Pentax Optio H90 Orange Operating Manual

Setting Pixel Track SR

You can set this function to correct camera shake which occurs during
shooting. If you set Pixel Track SR to O (On), the camera automatically
corrects any camera shake in the images you shot. The default setting
is P (Off).
Use the Movie SR function (p.124) to correct camera shake in C
(Movie) mode.
1
3 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track
SR].
3
Use the four-way controller (45)
to select O or P.
O
P
4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
M
f
When [Pixel Track SR] is set to O, camera shake is corrected after
shooting, and then the corrected image is saved.
114
Corrects camera shake.
Does not correct camera shake.
When [Pixel Track SR] is set to O
When the shutter release button is pressed halfway with [Pixel Track
SR] set to P, and the shutter speed is slow or the flash mode is set to
a (Flash Off) (Camera shake warning).
Rec. Mode
2/3
Movie
D-Range Setting
Pixel Track SR
Blink Detection
Digital Zoom
Instant Review
Exit
MENU