Resetting The Frame; Cleaning And Care Tips; Cleaning The Screen; Cleaning The Frame And Backing - HP sd828a1 - Smart WiFi Digital Photo Frame User Manual

Resetting the Frame

You can reset your HP Smart Wi-Fi Display to factory default settings, as follows:
From the Main Menu, navigate to Setup and press the Select button.
1.
Navigate to Factory Defaults and press the Select button.
2.
You will be asked to confirm that you want to reset your HP Smart Wi-Fi Display.
3.
Select Yes.
The frame will reboot once it is reset.
4.
WARNING: Setting your HP Smart Wi-Fi Display to factory default settings will
remove its details from the website, and you will need to add the frame again with
the new authorization code that you will see after going through the setup wizard.
For more information on the setup wizard, see "Setup Wizard" on page 13. For
information on adding a new frame, see "Adding Another Frame to your
www.hpframe.com Account" on page 27.

Cleaning and Care Tips

Please power off the HP Smart Wi-Fi Display before cleaning.
DO NOT push on the screen too firmly.
DO NOT spray or pour liquid cleaning agents directly on the screen or frame.
DO NOT use ammonia, alcohol, or abrasive detergent cleaning agents.

Cleaning the screen

Wipe screen with a clean, soft, lint-free cloth to remove dust and loose particles.
1.
If further cleaning is required, apply an appropriate cleaning agent (approved
2.
for LCD displays) to a clean, soft, lint-free cloth and wipe the screen.
Note: Do not apply too much pressure on the screen to avoid damaging it.

Cleaning the frame and backing

Use a clean, soft, lint-free cloth to remove dust and loose particles.
1.
If desired, apply an appropriate cleaning agent to a clean, soft, lint-free cloth
2.
and wipe the appropriate surfaces.
39