General Navigation; Rotating Pictures; Quadrant Display - HP sd828a1 - Smart WiFi Digital Photo Frame User Manual

General Navigation

In most cases you can use the navigation buttons (Up, Down, Left, Right) and the
Select button to navigate through the different menus. Sometimes, however, it may
be quicker to use one of the specific menu buttons, such as the Home, Favorites,
or Music buttons, which take you to the menu you want with a single press.
Note that, as the HP Smart Wi-Fi Display has to communicate with 3rd party
websites, as well as hpframe.com, there are times when the frame may be busy with
this communication, and it can cause delays in responding to the remote control.

Rotating Pictures

To rotate pictures, press the Photo Rotate button.

Quadrant Display

When viewing a slide show, you can either choose to view photos one at a time or
in a Quadrant display.
There are two ways to enable the Quadrant display:
From the Setup menu, choose Local Settings, then change Slideshow
1.
Mode to Quadrant. For more information, see "Local Settings" on page 17.
During slide show playback, press the Options button on the remote, and
2.
change Slideshow Mode to Quadrant. Press the Back button to return to
the slide show.
When the Quadrant option is chosen, the screen is divided into four, and the top
two quarters display images in a slide show fashion, while the bottom two quarters
display the clock and calendar.
You can navigate the quadrants using the remote, as follows:
Press the Select button on the remote control. This will highlight the upper-left
1.
quadrant.
Use the navigation buttons to select one of the four quadrants.
2.
Press the Select button again to display a list of items that can be displayed in
3.
that quadrant. Choose which item you wish to be displayed, and press Select
again.
Note: If you wish to keep this setup for next time, press the Options button and
choose Save Quadrant Setup.
9