Jumper
Setting
133
*
166
*
200
*
233
*
PSWD
BIOS
*
One set of the speed jumper pins must have a jumper plug installed; otherwise, the system will operate at an undetermined
speed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide.
jumpered
Table 5-1. System-Board Jumper Settings
Description
Reserved (do not use)
Jumpered when the microprocessor's internal speed is 166 MHz
Jumpered when the microprocessor's internal speed is 200 MHz
Jumpered when the microprocessor's internal speed is 233 MHz
(default)
Password feature enabled
Password feature disabled
(default)
Reserved (do not use)
unjumpered
Working Inside Your Computer
5-7