Using The Headset With A Bluetooth; Pairing The Headset With Your Phone - Bose 31952 Owner's Manual

Aviation headset
Table of Contents

Advertisement

05_Using the headset.fm Page 19 Wednesday, December 1, 2010 12:17 PM
English
Tab 2, 10
Using the headset
with a Bluetooth

Pairing the headset with your phone

Pairing entails having the Bose A20 Aviation Headset in pairing mode, setting
your Bluetooth-enabled phone to "discover" the headset, then confirming the
connection on the phone. Before you use your Bose
with your mobile phone, you must pair the two devices.
1. Turn on the headset and make sure the multifunction switch is in the top or
middle position, NOT in the emergency off position.
Power
indicator light
Power button
Top position
The power indicator light glows green or yellow, depending on the charge
level of the battery. If the light is red, the battery is low and needs replacing.
2. Press the Bluetooth function button (to activate Bluetooth.
If this is the first time you've activated or are attempting
to pair Bluetooth, the Bluetooth indicator will flash at a
slow rate alternating with the Power indicator. This
indicates that the headset is in "discoverable" mode
and ready to be paired to a cell phone.
If the Bluetooth indicator does not flash alternately with the Power indicator
flash or you are trying to pair a headset that has previously been paired with
another phone, you will need to press and hold the Bluetooth function
button for 5 seconds in order to put the headset into "discoverable" mode.
3. With your Bluetooth-enabled phone turned on, locate the Bluetooth feature,
usually under Tools, Connect, or Bluetooth Devices. (Refer to the owner's
instructions that came with your phone for further details.)
4. Set the phone to "discover" or "add" a Bluetooth device. When Bose A20
appears in the list of devices, select and confirm this choice.
5. If you are asked for a passkey or PIN, enter the digits 0000.
The control module Bluetooth and power indicators flash together to confirm
successful pairing.
If pairing is unsuccessful, repeat steps 3 - 5 above.
Tab 3, 11
Tab 4, 12
®
-enabled phone
Multifunction Switch
Middle position
Tab 5, 13
Tab 6, 14
Tab 7, 15
U
®
A20™ Aviation Headset
Tab 8, 16
H
SING THE
EADSET
Bluetooth
indicator
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

A20

Table of Contents