Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
5.
Loosen the square plastic fastener to gain access to the speaker wire.
6.
Disconnect the speaker wire from the white system board connector labeled SPEAKER.
7.
Remove the screw that secures the speaker to the inside of the chassis, slide the speaker away
from the power switch, and then remove it from the chassis.
To install the speaker, reverse the removal procedures.
116 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
85).
84).
83).