Reset Configuration Data; Resources Controlled By; Irq Resources - Compaq dx2700 - Microtower PC Manual

Computer Setup (Continued)
Heading Option
PnP/PCI

Reset Configuration Data

Configurations

Resources Controlled By

IRQ Resources

✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
• IRQ-3 assigned to
• IRQ-4 assigned to
• IRQ-5 assigned to
• IRQ-7 assigned to
• IRQ-9 assigned to
• IRQ-10 assigned to
• IRQ-11assigned to
• IRQ-12 assigned to
• IRQ-14 assigned to
• IRQ-15 assigned to
Description
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to
reset Extended System Configuration Data
(ESCD) when you exit Setup, if you have
installed a new add-on and the system
reconfiguration has caused such a serious
conflict that the OS cannot boot.
Allows you to select whether resources are
controlled automatically or manually:
• Auto (ESCD–Extended Storage
Configuration Data)
• Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields since BIOS automatically assigns them.
When resources are controlled manually,
allows you to assign each system interrupt a
type, depending on the type of device using
the interrupt.
Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA
PnP for devices compliant with the
Plug-and-Play standard whether designed for
PCI or ISA bus architecture.
www.hp.com
Computer Setup (F10) Utility
11