Using Computer Setup (F10) Utilities
✎
Computer Setup (F10) Utility Guide
Computer Setup can be accessed only by turning the computer on or
restarting the system. To access the Computer Setup Utility menu,
complete the following steps:
1. Turn on or restart the computer. If you are in Microsoft Windows,
Start > Shut Down > Restart
click
2. As soon as the computer is turned on, press and hold the
until you enter Computer Setup.
If you do not press the
restart the computer and press and hold the
the utility.
3. The Computer Setup Utility screen is divided into menu headings
and actions.
Eight menu headings appear on the Computer Setup Utility
screen:
❏
System Information
❏
Standard CMOS Features
❏
Advanced BIOS Features
❏
Advanced Chipset Features
❏
Integrated Peripherals
❏
Power Management Setup
❏
PnP/PCI Configurations
❏
Hardware Monitor Setup
www.hp.com
.
F10
key at the appropriate time, you must
Computer Setup (F10) Utility
F10
F10
key again to access
key
2