Compaq dx2700 - Microtower PC Manual page 8

Ä
Computer Setup (F10) Utility Guide
Five action choices are listed on the Computer Setup Utility
screen:
❏
Load Defaults Setting
❏
Set Supervisor Password
❏
Set User Password
❏
Save Setting and Exit
❏
Exit Without Saving
Use the arrow keys to select the appropriate heading, then press
Enter
. Use the arrow (up and down) keys to select the option you
want, then press
Esc
.
4. To apply and save changes, press
Setup on the Computer Setup Utility screen and press
If you have made changes that you do not want applied, select
Exit Without Saving and press
CAUTION: Do NOT turn the computer power OFF while the ROM is
saving the F10 Computer Setup changes because the CMOS could
become corrupted. It is safe to turn off the computer only after exiting the
F10 Setup screen.
www.hp.com
Enter
. To return to the previous screen, press
F10
Enter
Computer Setup (F10) Utility
or select Save & Exit
Enter
.
.
3