Download Print this page

Screen Position Adjustment; Power Saving - Acer V225HQL User Manual

User manual
Hide thumbs

Advertisement

Table of Contents

Screen position adjustment

To optimize the viewing position, you can adjust
the monitor tilt, using both of your hands to hold
the edges of the monitor. The monitor can be
adjusted to 15 degrees up or 5 degrees down.
Connecting the adapter and AC Power code
Check first to make sure that the power cord
you use is the correct type required for your
area.
The monitor has a universal power supply
that allows operation in either 100/120 V AC
or 220/240 V AC voltage area. No user-
adjustment is required.
Plug one end of the AC power cord to the
Adapter, and plug the other end into an AC outlet.
For units using 120 V AC:
Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
For units using 220/240 V AC:
Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.

Power saving

The monitor will be switched to "power saving" mode by the control signal
from the display controller, as indicated by the amber-colored power LED.
Power saving
The power saving mode will be kept until a control signal has been detected or
the keyboard or mouse is activated. The recovery time from "power saving"
mode back to "on" is around 3 seconds.
Mode
On
3
5
LED light
Blue
Orange

Advertisement

Table of Contents
loading

  Related Manuals for Acer V225HQL

This manual is also suitable for:

V215hl