BenQ M2400HD - 24" LCD Monitor Service Manual page 29

24" LCD Color Monitor
Information
HDMI Auto
Switch
Reset All
Factory OSD Menu
Turn off the monitor, keep pressing the "MENU" + "ENTER" buttons, and turn on the monitor, then when we press
the AUTO button, the factory OSD will be at the left top of the panel as below.
the software on the PC.
Displays the current
monitor property settings.
When this function is activated,
HDMI port will be in the input auto
select loop. Otherwise, HDMI can
only be selected by input select or
by hot key.
Resets all mode, color and
geometry settings to the
factory default values.
option. Press the
the or
to change the
settings.
Press the ENTER
key to select this
option.
Press the ENTER
key to select this
option. Press the
the or
to change the
settings.
Press the or
keys to
change the settings.
29
BenQ E2400HD
keys
• ON
• OFF
keys
• YES
• NO