Park And Retrieve A Call Using Park; Park And Retrieve A Call Using Assisted Directed Call Park; Park And Retrieve A Call Using Manual Directed Call Park - Cisco 6961 - Unified IP Phone Standard VoIP Software Manual

Park and Retrieve a Call Using Park

1. During a call, press the Park softkey.
Your phone displays the call park number where the system stored your call.
2. Note the call park number displayed on your phone screen.
You will use the number to retrieve the call.
3. Hang up.
You have a limited time to retrieve a parked call before it reverts to ringing at the original number.
4. From any other Cisco Unified IP Phone in your network, enter the call park number to retrieve the
call.

Park and Retrieve a Call Using Assisted Directed Call Park

1. During a call, press a Directed Call Park button displaying an idle Line Status indicator.
You have a limited time to retrieve the parked call before it reverts to ringing at the original
number.
2. Retrieve the call, from any other Cisco Unified IP Phone in your network as follows:
a. Enter the park retrieval prefix.
b. Dial the Directed Call number.
For example, if the park retrieval prefix is "99" and the Directed Call number is "1234", enter
991234.

Park and Retrieve a Call Using Manual Directed Call Park

1. During a call, press the Transfer button
2. Enter the Directed Call number where you will park the call.
3. Press Transfer again to finish parking the call, then hang up.
You have a limited time to retrieve a parked call before it reverts to ringing at the original number.
4. Retrieve the call, from any other Cisco Unified IP Phone in your network as follows:
a. Enter the park retrieval prefix.
b. Dial the Directed Call number.
For example, if the park retrieval prefix is "99" and the Directed Call number is "1234", enter
991234.
46
.
OL-18397-01