Lcd Panel/Viewfinder Display; Multiple Exposure - Nikon F75D - F75 QD = N75 35mm SLR Camera Body Only Instruction Manual

LCD Panel/Viewfinder Display

LCD panel
Self-timer (p. 40)
Shutter speed
Auto Exposure
Bracketing (p. 66)
Flash sync mode
(p. 92/95)
Focus area (p. 48)
Multiple Exposure (p. 69)
* The illustrations are fully labelled for your reference.
NOTE: About LCD
The LCD panel and viewfinder displays tend to turn darker at high temperatures and
have slower response time at low temperatures. In either case, when the temperature
returns to normal, the displays also return to normal.
LCD illuminator button
Pressing the button turns exposure meter on (p. 17),
and the LCD panel is illuminated and can be confirmed in
the dark. The illumination remains on as long as the
exposure meter is on. Illumination turns off after lightly
pressing the shutter release button or shutter release.
: The illuminator can be set to come on when
any button is pressed (p. 76).
8
Remote control (p. 84)
Aperture
Beep sound (p. 28)
Battery power (p. 17)
Exposure
Compensation (p. 64)
Frame counter (p. 21)/Exposure
Compensation value (p. 64)
Custom Setting (p. 72)
Viewfinder display
Battery power (p. 17)
Film status (p. 21)
Focus indicator
(p. 29/44)
Shutter speed
Aperture
Electronic analogue exposure (p. 61)/
Exposure Compensation value display (p. 64)
Vari-Brite focus area and warning indications
The F75/F75D employs the convenient Vari-Brite Focus Area display system; it
enables clear display of the focus brackets at the selected focus area in the
viewfinder for easy identification. When the finder image is bright, the focus brackets
are displayed in black and when the finder image is dark, the focus brackets are
momentarily illuminated in red. Also, when battery power is low or film is not loaded
properly, warning indications such as
* Due to characteristics of the LCD used in the Vari-Brite Focus Area display system, a thin
line outside the selected focus area may also be displayed or the entire viewfinder may
be illuminated in red under certain conditions. These are not malfunctions.
: Focus area highlight can be cancelled or can be set to appear in any
situation (p. 74).
: Warning indications in the viewfinder can be set not to appear (p. 74).
CAUTION: About viewfinder
The viewfinder will be dark without battery power but brightens after installation of
fresh batteries. This is not a malfunction.
12mm-dia. reference circle
for Centre-Weighted
Metering area (p. 60)
Focus area (focus
brackets) (p. 28/48)
Flash ready-light (p. 39/91)/Flash
recommended indication (p. 95)
Exposure Compensation (p. 64)
or are displayed in the viewfinder.
www.mynikon.com.pl
9