Set Date And Time (F75D Only); Basic Operation 1 - Nikon F75D - F75 QD = N75 35mm SLR Camera Body Only Instruction Manual

4

Set Date and Time (F75D only)

This camera allows you to imprint Year/Month/Day, Day/Hour/Minute (24-hour
clock), Month/Day/Year or Day/Month/Year on your picture in any exposure
mode. (For imprinting date/time, see page 42.)
Adjusting date and time (Example: year 2003, April 1)
1 Push button to select one of the date or time displays.
Push SELECT button so section to be corrected starts
blinking.
2 Push ADJUST button to change the blinking numbers and after
correction, push SELECT button until the numbers stop blinking.
Quartz Date power source
Batteries in the camera body also power the quartz date. Set the date and time after
installing batteries for the first time. When changing batteries, date and time remain in
the quartz date memory up to approx. 30 minutes without batteries. If the date and
time data are lost, reset them. Note that the time the data remains in the memory
becomes shorter at low temperatures.
22
• Date cannot be set in Day/Hour/Minute
display. To set date, select Year/Month/Day,
Month/Day/Year or Day/Month/Year.
• Set the time in Day/Hour/Minute display.
• Each time you push the ADJUST button, year
section moves up from 98 to 49 (back to 98
after 49).
• To change the numerical indication rapidly,
hold the ADJUST button down for more than
1 sec.
• Push SELECT button until the date/time
display stops blinking. When the imprint
—
indicator appears in the data imprint
LCD panel, the setting is complete.
BASIC
OPERATION 1
This section features the settings for most
common picture-taking situations using
AUTO mode ( ) to enable easy operation
even for beginners.
Shooting modes/functions explained in this section are as follows:
Lens attached G-type AF Nikkor (p. 18)
Focus mode AF (autofocus) (p. 24)
Dynamic AF Mode with Closest-
Focus area
Subject Priority (p. 24)
25-segment 3D Matrix Metering*
Exposure metering system
(p. 26)
Exposure mode AUTO mode (
Flash sync mode Front-Curtain Sync (
Film advance mode Single frame ( ) (p. 79)
Custom setting Default (initial) settings (p. 72)
* Automatically set when AUTO mode is selected.
) (p. 26)
/ )* (p. 92)
www.mynikon.com.pl
23