Short Cuts Function From The Buttons; White Balance - ViewSonic VX2262WM - 22" LCD Monitor Service Manual

SHORT CUTS FUNCTION FROM THE BUTTONS

[1]
[2]
[▼]
[▲]
[▼] + [▲]
[1] + [2]
[1] + [▼] + [▲]
(Keep pushing 5 sec)
[1] + [▲]
[1] + [▼]
ViewSonic Corporation
Main Menu
Input toggle (D-sub/DVI); refer to Appendix D)
To immediately activate Audio menu.
To immediately activate Contrast menu. It should be change
to Brightness OSD by push button [2]
*1 refer to the Brightness OSD
*2 Under sRGB or DCR mode, this function is disabled.
1. In the CR/ BT menu, Recall both of Contrast and
Brightness to default without OSD message.
2. In the Audio menu, Recall both of audio volume and mute
to default without OSD message.
1. Toggle 720x400 and 640x400 mode when input 720x400
or 640x400 mode.
2. Toggle 1400x1050 and 1680x1050 mode when input
1400x1050 or 1680x1050mode.

White Balance

1. It will not shown on user's guide
2. OSD message as below,
3. Recommend environment
3.1. Optical (Best) input timing = 640 x 480 @ 60Hz;
Following timing modes also recommended,
800 x 600 @ 60 Hz
1024 X 768 @ 60 Hz
3.2. Pattern as below,
OSD Lock / Unlock
Power Lock / Unlock
- 15 –
Confidential - Do Not Cop
(Image = no blanking)
VX2262wm/wmp