Storing Your Own Sound Adjustments - JVC F190 - KS Radio / Cassette Player Instructions Manual

Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want
to adjust.
• See page 11 for details.
2
Select "BAS" (Bass) or
"TRE" (Treble).
SEL
3
Adjust the bass or treble level.
• See page 11 for details.
12
4
To turn on or off the super bass.
Each time you press S.BASS, the super bass
function turns on and off alternately. See page
11 for details.
S.BASS
5
Repeat steps 2 and 3 to adjust the
other items.
6
Press and hold SCM until the
sound mode you have selected in
step 1 flashes on the display.
Your setting is stored in memory.
7
Repeat the same procedure to store
other settings.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 11.