Laser Safety Statement; Tv Antenna Connectors Protection - HP 742n - Pavilion - 512 MB RAM Support Manual

Laser Safety Statement

Class 1 LED Product
The CD-ROM and DVD-ROM drives contain a laser system and are classified as a
"Class 1 Laser Product" under a U.S. Department of Health and Human Services
(DHHS) Radiation Performance standard according to the Radiation Control for
Health and Safety Act of 1968.
Should the unit ever require maintenance, contact an authorised service location.
Warning: Use of controls, adjustments, or performance
procedures other than those specified in the Upgrading and
Servicing the PC guide may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not
try to open the enclosure of the CD-ROM or DVD-ROM.
Laser Product Label
The following label or equivalent is located on the surface of HP laser products:

TV Antenna Connectors Protection

External Television Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is electrically grounded so as to provide some
protection against voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with regard to
proper electrical grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
Lightning Protection
For added protection of any Hewlett-Packard product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug the product
from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product from lightning and power line surges.
This label indicates that the
product is classified as a
CLASS 1 LASER PRODUCT. This
label appears on a laser device
installed in your product.