Table 16. Power Profiles That R210 Bios Will Expose In Bios Setup - Dell External OEMR XL R210II Technical Manual

Dell
USB wake Generic
DBS N/A
C State N/A
Support
Power Profile N/A
support
Power Profiles that R210 BIOS will Expose in BIOS Setup
Table 16.
Maximum Performance
OS Control
Active Power Controller
Custom
PowerEdge R210 Technical Guide
N/A This feature is not supported on this system
since the S1 state is not supported.
Processor This feature does P state transition under
MSRs Windows
Processor and This feature allows multiple C state supports for
PCH registers Processor. This feature will work under
Windows and ACPI OS that understand C states.
Processor/IMC 11G Servers will be the most energy smart
and PCH servers that Dell will ship. In addition to P,C
chipset and T states, BIOS will expose the Power
registers. Profiles to the OS. Each Power profile will have
a specific settings and it will fine tune
processor, MCH, IOH and South Bridge. For
detailed explanation on how this feature works,
please look at BIOS Power Management
specification located in Design Docs under R310
engineering.
DBPM Disabled ( BIOS will set P-State to MAX)
Memory frequency = Maximum Performance
Fan algorithm = Maximum Performance
Enable OS DBPM Control (BIOS will expose
all possible P states to OS)
Memory frequency = Maximum Performance
Fan algorithm = Minimum Power
Enable DellSystem DBPM (BIOS will not make all P states
available to OS)
Memory frequency = Maximum Performance
Fan algorithm = Minimum Power
CPU Power and Performance Management:
Maximum Performance | Minimum Power | OS DBPM | System
DBPM
Memory Power and Performance Management:
Maximum Performance |1333Mhz |1067Mhz |800Mhz|
Minimum Power
Fan Algorithm
Maximum Performance | Minimum Power
42