Table of Contents
Advertisement
5.1.4
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support CD, the USB flash
disk, or the floppy disk that contains the updated BIOS file.
•
•
•
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1.
Turn on the system.
2.
Insert the floppy disk with the original or updated BIOS file to the floppy disk
drive.
3.
The utility displays the following message and automatically checks the
floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file "P5BVMP.ROM". Completed.
Start flashing...
4.
Restart the system after the utility completes the updating process.
5-6
Prepare the motherboard support CD,
disk containing the updated motherboard BIOS before using this utility.
Ensure that you rename the original or updated BIOS file in the floppy disk
or the USB flash disk to P5BVMP. ROM.
If your display monitor is connected to the onboard VGA connector, the
display monitor will turn-off and the system will beep once while CrashFree
BIOS 3 starts updating your system. The system will beep once again
while the process is finished, and the display will return after the system
restarts.
the USB flash disk,
Chapter 5: BIOS setup
or the floppy
Advertisement
Table of Contents
