Table of Contents
Advertisement
2.1
Preparation
Before you proceed, ensure that you have all the components you plan to install in
the system.
Basic components to install
1.
Central processing unit (CPU)
2.
DDR2 Dual Inline Memory Module (DIMM)
3.
Expansion card(s)
4.
Hard disk drive
5.
Optical drive
2.2
Before you proceed
Take note of the following precautions before you install components into the
system.
•
•
•
The system motherboard comes with an onboard standby power LED. This LED
lights up to indicate that the system is ON, in sleep mode or in soft-off mode, and
not powered OFF. Unplug the power cable from the power outlet and ensure that
the standby power LED is OFF before installing any system component.
P5B-VM Onboard LED
2-2
Use a grounded wrist strap or touch a safely grounded object or a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
SB_PWR
ON
OFF
Standby
Powered
Power
Off
Chapter 2: Basic installation
Advertisement
Table of Contents
