Key Operator Assistance Call - Sharp AR-C250 Key Operator's Manual

KEY OPERATOR ASSISTANCE CALL

When the copier is in need of service or care not usually performed
by general users, the copier will stop and one of the following
messages listed below will appear.
Message
CHECK STAPLER POSITION OR STAPLE JAM.
SORTER IS OUT OF SERVICE.
PRESS [CA] TO CANCEL JOB.
DUPLEX SYSTEM IS OUT OF SERVICE.
THE DOCUMENT FEEDER IS OUT OF
SERVICE. PRESS [CA] TO CANCEL JOB.
SELECTED PAPER TRAY IS OUT OF SERVICE.
PLEASE SELECT ANOTHER PAPER TRAY.
CALL FOR SERVICE.
CODE: -
Remedy
See page 7-11 of the Operation Manual for staple jam
removal. If the trouble cannot be easily remedied, use key
operator program "DISABLING OF STAPLER" (page 29) to
prevent the use of the stapler.
Contact your authorized Sharp Service Center for service.
Contact your authorized Sharp Service Center for service.
(This message will appear when the optional staple sorter
(AR-SS2) malfunctions.)
Use key operator program "DISABLING OF DUPLEX
COPYING" (page 28) to prevent the use of the optional
duplex system. Contact your authorized Sharp Service
Center for service.
Use key operator program "DISABLING OF DOCUMENT
FEEDER" (page 28) to prevent the use of the optional
document feeder. Contact your authorized Sharp Service
Center for service.
Contact your authorized Sharp Service Center for service.
With this message, an alphanumeric code will appear to
indicate a malfunction has occurred which cannot be
corrected by the key operator.
Contact your authorized Sharp Service Center for service.
Be sure to report the alphanumeric code information as
well. This will enable the Service Center to prepare to
correct the malfunction associated with the code.
33