Total Count - Sharp AR-C250 Key Operator's Manual

OTHER PROGRAMS
The following two programs are not included in the four categories. The
programs can be selected by pressing the relevant key on the touch
panel after the key operator program mode is selected.

Total Count

This program is used to display the total counts, including counts of the copier,
document feeder, duplex module, and stapler.
An 11" x 17" or a 12" x 18" copy is counted as two copies.
A two-sided copy is counted as two copies (four copies for 11"x 17").
Covers and transparency inserts are counted as one copy even if they are
blank.
The lists printed with the key operator programs are included in "SELF
PRINTS".
When the "TOTAL COUNT" key is pressed, the following display will appear.
Program List Printout
This program is used to print out the list of available key operator
programs.
When the "PROGRAM LIST PRINTOUT" key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
TOTAL COUNT
COPIES : 600,000 SELF PRINTS
(COLOR)
COPIES : 500,000 SELF PRINTS
(B/W)
DUPLEX : 500,000
DOCUMENT : 600,000
FEEDER
STAPLER : 500,000
The total counts for all units in use will be displayed.
To print these counts, press the "PRINT" key.
Press the "OK" key to exit the program.
KEY OPERATOR PROGRAMS
PROGRAM LIST PRINTOUT
SELECT MODE.
COPIER
Press the "COPIER" key.
The copier will start printing. To stop printing after starting, press
the "CANCEL" key.
The "PRINTER" and "ALL PROGRAMS" keys are used when an
optional printer feature is installed.
OK
: 500,000
(COLOR)
: 500,000
(B/W)
PRINT
OK
PRINTER
ALL PROGRAMS
31