Adding A Watermark To Acopy (Watermark) - Sharp MX-3111U Operation Manual

ADDING A WATERMARK TO A COPY (Watermark)
This function requires the hard disk drive.
When making a copy, specific text can be added to the copy as a watermark. The color, density, angle, and pages (first
page only or all pages) can be selected for a watermark. The watermark is printed at the center of the paper.
Printing "CONFIDENTIAL" on the paper
The following 12 selections are available for the stamp text.
CONFIDENTIAL
FOR YOUR INFO.
URGENT
Three levels can be selected for the density of the watermark.
Seven colors can be selected for the watermark color.
The angle of a watermark can be selected in the range +90 degrees to -90 degrees in increments of 45 degrees.
Touch the [Watermark] key in the stamp selection screen.
1
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING
Stamp
Watermark
CONFIDENTIAL PRIORITY
FOR YOUR INFO. DO NOT COPY
2
URGENT DRAFT
PRELIMINARY FINAL
IMPORTANT
TOP SECRET PLEASE REPLY
PRIORITY
DO NOT COPY
DRAFT
OK
Cancel
Print Color
First Page
Bk 1 2 3
Angle
All Pages
(+90 ~ -90)
45
COPY
PRELIMINARY
IMPORTANT
TOP SECRET
STAMP" (page 2-85).
Touch the key of the watermark that you
wish to use.
2-102
COPIER
FINAL
COPY
PLEASE REPLY
Contents