Sharp MX-3111U Operation Manual page 431

Place next original.
Press [Start].
When finished, press [Read-End].
7
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure,
resolution, scan size, and send size.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
(Pg.No.x)
Configure Read-End
4-86
Touch the [Read-End] key.
FACSIMILE
Contents