Navigating To A Waypoint Using The Plotter; Cancel Navigation - Eagle View Installation And Operation Instructions Manual

Eagle electronics gps receivers operation instructions

Hide thumbs Also See for Eagle View:

Table of Contents

Navigating to a Waypoint using the

Plotter

The unique "birds-eye" view used by the

plotter gives you an easy way to navi-

gate to a waypoint. On the screen shown

at right, the diamond with a cross in it is

your present position. The box with the

"S" in it was your starting location when

you recalled the waypoint. The dotted line is called a track line and is the

shortest path from the starting location to the destination. The "D" is the

cursor destination, the number with a box around it is the waypoint. If you

follow the track line, you'll reach the destination, covering the shortest

distance in the least time.

The Eagle View does NOT take land features, altitudes, restricted or

prohibited areas, or any other feature into account when it projects the

track line on the screen. Therefore, you must use care when navigating

on the track line and avoid any object that may be in your path to the

destination.

The Eagle View continues to navigate to a recalled waypoint, the last

waypoint in a route, or the cursor posi-

tion until you stop it.

To stop the navigation function, press the

MENU key, then press the up or down

arrow keys until the "Cancel Naviga-

tion" label is highlighted. Press the right

arrow key. The unit stops showing navi-

gation information.

CAUTION!

Table of Contents

Show Quick Links

Table of Contents