Table of Contents
Advertisement
repeat until you are satisfied with the distance setting. If you want to
enable the other alarms, repeat steps 2 and 3.
4. Press
repeatedly to get back to the main page display.
EXIT
IMPORTANT ALARM NOTES:
Anchor Alarm - The anchor alarm may be triggered even when
you're sitting still. This typically happens when using small − less
than .05 mile − anchor alarm ranges.
Arrival Alarm - If the arrival alarm distance is set to a small num-
ber, the unit may not show navigation data to the next waypoint af-
ter you arrive at the first one. That occurs when you are not able to
come close enough to the first waypoint to trip the arrival alarm.
Check MMC Files and Storage Space
To check MMC Files:
Press
|
MENU
|
to see the free space on the card.
I
ENT
NFO
Main Menu (left) with MMC File Browser at right.
Communications Port Configuration
The unit has one NMEA 0183 version 2.0 compatible communication
port, or com port for short. The Com Port Menu, accessed from the Sys-
tem Setup Menu, allows you to configure the communications port to
send or receive data to another electronic device. The com port can be
used for NMEA or SiRF Binary data transfer.
To set Com Port Configuration:
1. Press
MENU
2. Press ↓ to
C
|↓ to
MENU
B
|
|↓ to
MENU
S
OMMUNICATIONS
|
F
ROWSE
ILES
|
S
ENT
YSTEM
ETUP
|
.
P
ENT
ORT
70
. Press ↓ to
ENT
.
MMC C
ARD
Advertisement
Table of Contents
