Monitoring Function And Answering A Call; Use - Philips WelcomeEye Lite User Manual

6.2. Monitoring function and answering a call

1 2
With the screen off: turns on the screen and displays the video from the intercom panel.
Also turns on the sound coming from the intercom panel to the monitor. Sound from the
1
With the screen on: turns off the video display and returns the monitor to standby mode.
With the screen off: allows access to the settings menu (see previous section).
2
With the screen on: enables sound from the monitor to the intercom panel. If the screen is
With the screen off: no effect. The screen must be on to use this button.
3
With the screen on: unlocks an electric strike plate (not included) if an electric strike plate is
With the screen off: no effect. The screen must be on to use this button.
4
With the screen on: activates the gate motorization control output (not included) if a gate

7. USE

Answering a call:
• A call made using the intercom panel button triggers the chime and displays the video on the
monitor. You have 30s to answer the call. Once you have identified the visitor, press the
button to communicate with them.
• After two minutes of conversation, the call ends and the screen returns to standby mode. If the
conversation ends before the 2-minute timeout, press the
returns to standby mode.
10
3 4
monitor to the intercom panel is left muted.
Ends the call if communication with a visitor is in progress.
on because a visitor rang, it allows you to respond.
connected to the intercom panel.
motor drive is connected to the intercom panel.
Philips - Lite - V1
button to end the call. The screen